It’s Hard to Orchestrate an Oxygen Therapy Symphony…
…with Only One Octave.
Feeling restrained by traditional oxygen masks,
like a musician with only one octave?
With Oxy2Mask, precisely deliver oxygen across a wide range of concentrations, ensuring your patients receive the exact level of support they need.
The Oxy2Mask Open Oxygen Mask Delivers Benefits at All Levels of Respiratory Care:
Clinician Flexibility
and Efficiency
Facing challenges with frequent oxygen mask swaps for varying oxygen concentrations? Oxy2Mask is the solution. Our design adapts seamlessly to a range of oxygen concentrations, ensuring patients get the exact support they need, while streamlining your workflow.
Patient Safety
and Comfort
Do your patients often complain about uncomfortable masks during oxygen therapy? Say goodbye to those claustrophobic experiences. Oxy2Mask is here to revolutionize the way we think about oxygen therapy masks, offering unmatched comfort and safety.
Lower Costs and
Reduce Waste
Are you tired of the high oxygen mask costs and the hassle of using multiple masks for different oxygen delivery needs? Cut down on unnecessary expenses and reduce plastic waste with Oxy2Mask. Experience efficient oxygen delivery using just one device, saving both time and resources.
Deliver Precision Therapy and Conduct a Symphony of Patient Care with Oxy2Mask.
With traditional masks, you switch masks each time you need a specific range of oxygen delivery. It’s like switching instruments when you need another octave.
Not so with Oxy2Mask. With our unique and patented diffuser technology, you have all of the octaves of oxygen therapy at your fingertips.
What Respiratory Therapists and Patients Are Saying About Oxy2Mask
“We initiated a trial of the Oxy2Mask™ with several of our patients who already were on mask oxygen. The patients immediately commented that they didn’t feel so claustrophobic with this mask.”
Lisa Kinler, RRT
St. Tammany Parish Hospital
“These are a safer way to give higher flows of O2. Patients who fight traditional masks will keep the Oxy2Mask on.”
Certified Respiratory Therapist
Hospital System in Indiana, USA
“Your mask is the best out there, I use it all the time! With this oxygen face mask you don’t have to inhale the last breath you exhaled.”
Don G., Homecare User
Cedar City, UT
Save 20 minutes a week of total patient care time – or 0.2 of a full-time hospital staff a year.
“We have tried it on many patients and in many different situations. We have found that by going to the Oxy2Mask we were able to reduce therapist time and cost of supplies.”
– Tom Strait, H. Lee Moffitt Cancer Center
Learn more on how Oxy2Mask improves patient safety while significantly reducing costs – simply, fill out this form to download a copy of Leveraging Technology to Maximize Efficiencies in Today’s Challenging Respiratory Care Environment – Hoerr, C. et al
Download Your Copy of Our Clinical Research Report
Oxy2Mask combines
superior patient comfort,
efficient oxygen delivery,
and increased safety.
Oxy2Mask is innovative and user-friendly featuring a powerful diffuser and open system designed to meet the individual needs of respiratory therapists, nurses, patients, and hospital administrators.
Oxy2Mask: The Next Generation Oxygen Delivery System
Unlike traditional medical oxygen interfaces, Oxy2Mask delivers oxygen concentrations from 24%-90%* FiO2, with flows ranging from 1 to 15+ liters per minute.
*AARC Clinical Practice Guidelines. Reprinted from Respiratory Care (Respir Care 2002:47(6):717-720)
See how Oxy2Mask stands out among different masks for oxygen delivery in hospitals.
Oxygen Therapy Simplified: Your Questions Answered
All you need to know about Oxy2Mask and efficient oxygen delivery.
Do I need a high flow meter to use OxyMask?
No, you do not need a high flow meter to use Oxy2Mask™. The Oxy2Mask™ will reach its maximum performance at approximately 15 liters. If additional flows are required, a normal flow meter on flush will deliver up to 60 lpm. You may choose to use a high flow meter to document the exact liter flow delivered but that is often not required if you are using a pulse oximeter.
Can OxyMask be used with a humidifier?
Yes, the Oxy2Mask™ can be used with a bubble humidifier, the same as one would use with a nasal cannula with flows from 1 to 6 litres per minute. But unlike a nasal cannula, the Oxy2Mask™ does not cannulate an orifice and therefore, a bubble humidifier is usually not necessary. Additionally, during the patient’s inhalation, room air containing humidity is drawn in through the openings in the mask and is mixed with the prescribed oxygen flow.
When using at home, how often do you need to replace the OxyMask or OxyArm?
When using Oxy2Mask or OxyArm at home, be sure to replace the device every 10 days if being used continuously, or every 30 days if using occasionally.
What do I do if the OxyMask or OxyArm becomes dirty?
Discontinue use at first sign of wear or damage. If mask shell is dirty, it can be cleaned with a clean, damp cloth. Do not use any cleaning agents. Do not block or clog the snap fit diffuser as this will stop the flow of oxygen.
Are OxyMasks free of natural rubber latex and phthalates?
Yes, all Oxy2Masks are free of natural rubber latex and phthalates such as DEHP.
Are Non PVC OxyMasks available?
Yes, Oxy2Mask™ offers four codes that are non-PVC:
- OM-7025-8 Oxy2Mask Standard 7’ Tube
- OP-7025-8 Oxy2Mask Plus 7’ Tube
- OK-7025-8 Oxy2Mask Kid 7’ Tube
- OT-7025-8 Oxy2Mask Tyke 7’ Tube
Will the OxyMask ETCO2 deliver 24-90% oxygen?
No, the ETCO2 Oxy2Mask™ will deliver between 24%-83% oxygen. This is because the Oxy2Mask™ uses a different inverted sampling cup inside the diffuser to allow for better CO2 sampling.
Does extension tubing alter FiO2 output from the mask?
Yes, FiO2 can be affected. To avoid changes in output, use back pressure compensated flow meters to make sure the delivered flow stays the same. In this case, extension tubing will not affect FiO2 because the oxygen delivery will be the same. And, as with all Oxy2Masks, simply adjust flow up or down to meet the patient’s required saturation.
In the United States, is there a Healthcare Common procedure Coding System (HCPCS) code assigned to OxyMask?
Yes, code A4620 (Variable Concentration Mask) can be used when billing the Durable Medical Equipment Medicare Administrative Contractors (DME MACs). The assignment of this HCPCS code is not an approval or endorsement of Oxy2Mask, nor does it imply or guarantee claim reimbursement or coverage. For billing and coverage information for your jurisdiction, there are three options:
- Refer to your DME MAC Supplier Manual for coverage
- Refer to your claim submission instructions
- Contact your local DME MAC
Download the Full Clinical Research Report
Discover how your hospital can provide safer oxygen delivery with Oxy2Mask, simplifying the process for clinicians and reducing oxygen consumption by up to 20%.
About Southmedic
At Southmedic, we don’t just manufacture oxygen masks; we innovate solutions that transform lives and redefine oxygen therapy.
Southmedic is a global leader in the healthcare industry, relentlessly committed to improving patient care. Established in 1983, our aim has always been to find a better way to address healthcare challenges and deliver superior patient outcomes. We believe in the power of innovation and quality, a belief that is exemplified in our patented Oxy2Mask™ device.
Join us in our mission to improve patient care globally. With Southmedic and Oxy2Mask™, experience the fusion of innovation, quality and passion in finding a better way to deliver healthcare.
